Technical Help
 

{HOME} {HISTORY} {CLASSIFIEDS} {REGISTRY} {TECH INFO} {OUR MISSION}

 

Factory Torque Specifications and More

1. Break-in Period: First 500 miles - Vary engine speed. Do not exceed 70 mph.
                            At 500 miles - Service all adjustments, tighten all fasteners,
                            change engine oil.

2. Spark Plug Gap: .035"
    Spark Plug Torque: 15 ft-lbs

3. Tire Pressure (Dunlop 491 Elite II):
      Up to 200 lb load: Front - 36 psi cold   Rear - 36 psi cold
      200 lb - 440 lb load: Front - 36 psi cold   Rear - 40 psi cold

4. Engine Specifications:
     * Type - 50° X-Twin™
     * # of Cylinders - 2
     * Bore - 3.66-inch (25.4 mm)
     * Stroke - 4.02-inch (92.9 mm)
     * Displacement - 86 cubic inches (1386 cc)
     * Compression Ratio - 9.2:1

5. Super X Dimensions:
     * Overall length - 92.5-inches (2.34 m)
     * Overall width - 39.5-inches (1.00 m)
     * Overall height - 52.5-inches (1.33 m)
     * Saddle height - 26.5-inches (.67 m)
     * Wheelbase - 62.9-inches (1.60 m)
     * Ground Clearance - 5.9-inches (149.9 mm)

 

Copyright © 2000-2010 Superxowners.com, unless otherwise stated.  All rights reserved. No portion of this site may be copied, reproduced, or distributed without the written permission of Superxowners.com.
This is a registry  and history site for the preservation of Excelsior-Henderson motorcycles. This site is not affiliated with the former Excelsior-Henderson Motorcycle Manufacturing Company.
Read our Mission Statement.
Questions or comments about this website? Contact the webmaster.
Concerned about your privacy? Read our statement here.